NT-MDT Spectrum Instruments – research, production, sales and support  of wide range AFMs and AFM-Raman-Nano-IR Systems

            

Ireland
Choose another
  
Shopping cart

MF004

2.100 € (Add to cart)

MF004 - set of 10 SNOM probes, supplied without tuning forks.

 

Material - single mode optical fiber Nufern 780HP.
Probe tip is coated by Al (70nm)/sublayer V (20nm) .
Tip diameter uncoated by Al (tip aperture)
140 - 220 nm (180±40)
Angle of fiber - about 20 degrees
Maximum optical input power - 400 microWatt
The probes are prepared by chemical etching method.
This method gives the optical efficiency 102 - 104 times better than those obtained by mechanical pulling.

 

 

Geometrical & Mechanical fiber  Specifications:

 

Clad Diameter

125.0 ± 1.5 µm

Coating Diameter

245 ± 15 µm

Core-Clad Concentricity

< 0.5 µm

Coating/Clad Offset

≤ 5 µm

Coating Material

UV Cured, Dual Acrylate

Operating Temperature

-55 to +85 °C

Short-Term Bend Radius

≥ 6 mm

Long-Term Bend Radius

≥ 13 mm

Proof Test Level

≥ 200 kpsi (1.4 GN/m²)

 

SNOM probe characteristics:

 

Characteristics

Probe type

MF004

Basic Nufern Fiber

780-HP

Operating wavelength, nm

780-970

Mode Field Diameter

5.0 ± 0.5 µm @ 850 nm

Second Mode Cut-Off, nm

730 ± 30

Optical efficiency for wavelength 530 nm

10-4 - 10-3

Optical efficiency for working wavelength

~ (10-5 - 10-4)

 

 

 

 

SNOM probe's end

Probe tip with Al coating.

Aperture is 140 - 220 nm (180±40).

 

Copyright © 1998 - 2024, NT-MDT SI