UNISET/25
UNISET/25 will be kitted according to your choice:
- 5 probes for noncontact/semicontact modes from Etalon or Golden series;
- 5 probes for contact modes from Etalon or Golden series;
- 5 probes for PFM - from Etalon or Golden series, except DCP model;
- 10 probes for SRM and for LAO Lithogpaphy from Etalon or Golden series, except DCP model.
PROBES GENERAL INFORMATION
PROBES SPECIFICATION
|
|
Material
|
Single Crystal Silicon, N-type, 0.01-0.025 Ohm-cm, Antimony doped - Golden series;
Polysilicon lever, monocrystal silicon tip - Etalon series.
|
|
Chip size
|
3.4x1.6x0.3mm - Golden series;
3.4x1.6x0.4mm - Etalon series.
|
|
Reflective side
|
Au
|
|
Cantilever number
|
1 rectangular NSG10, FMG01, CSG10, MFM01 series;
2 rectangular HA_C, HA_NC, HA_HR, HA_FM series;
|
|
Tip curvature radius
|
Typical 6 nm, guaranteed 10 nm for NSG10, CSG10, FMG01, HA_C, HA_NC, HA_HR, HA_FM probes;
25-35 nm for NSG01/Pt, HA_FM/W2C, HA_FM/CoFe;
40 nm for MFM01 probes.
|
|
Tip coating
|
PtIr, Au, W2C+ - for electrical measurements,
CoFe, CoCr - for magnetic measurements
|
| |
|
|
