MF003
MF003 - set of 10 SNOM probes, supplied without tuning forks.
|
Material - single mode optical fiber Nufern 630HP.
Probe tip is coated by Al (70nm)/sublayer V (20nm) .
Tip diameter uncoated by Al (tip aperture) 100 - 160 nm (130±30)
Angle of fiber - about 20 degrees
Maximum optical input power - 400 microWatt
The probes are prepared by chemical etching method.
This method gives the optical efficiency 102 - 104 times better than those obtained by mechanical pulling.
|
|
Geometrical & Mechanical fiber Specifications:
|
Clad Diameter
|
125.0 ± 1.5 µm
|
|
Coating Diameter
|
245 ± 15 µm
|
|
Core-Clad Concentricity
|
< 0.5 µm
|
|
Coating/Clad Offset
|
≤ 5 µm
|
|
Coating Material
|
UV Cured, Dual Acrylate
|
|
Operating Temperature
|
-55 to +85 °C
|
|
Short-Term Bend Radius
|
≥ 6 mm
|
|
Long-Term Bend Radius
|
≥ 13 mm
|
|
Proof Test Level
|
≥ 200 kpsi (1.4 GN/m²)
|
SNOM probe characteristics:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5x10-5 - 5 x 10-4
|
|
|
~ (10-5 - 10-4)
|
