|
 |
 Back
NSG20/Pt/15
| High Resonant Frequency NONCONTACT "GOLDEN" Silicon Cantilevers NSG20 series with Pt conductive coating |
- Standard chip size: 1.6x3.6x0.4 mm.
- Compatible with the most commercial SPM devices.
- High reflective Au coating (reflective property is 3 times better in comparison with uncoated cantilevers).
- Tip side of the chip is coated by Pt conductive coating.
- Thickness of Pt film is 20-30nm.
- Typical curvature radius of a tip: 35 nm.
- Tip height: 10 - 15 µm.
- Each chip has one TRIANGULAR spring.
- Recommended for semicontact modes and force lithography.
- Packaged in GelPak® boxes.
GelPak® is a registered trade mark of Vichem Corporation.
| Specification for NSG20 series |
| Chip thickness |
0.4mm |
| Reflective side |
Au |
| Spring number |
1 |
| Aspect ratio |
3:1 |
| Cone angle j |
<=22° |
| Curvature radius of a tip |
typical 10nm | |
 |
| Available Cantilever series |
Cantilever lenght, L±5µm |
Cantilever width, W±3µm |
Cantilever thickness, µm |
Resonant frequency, kHz |
Force constant, N/m |
| min |
typical |
max |
min |
typical |
max |
min |
typical |
max |
| NSG20 |
90 |
60 |
1.7 |
2.0 |
2.3 |
260 |
420 |
630 |
28 |
48 |
91 |
 |
Recommended measuring mode
N - noncontact, semicontact
C - contact |
cantilever series |
S - with calibrated SEM photo for each tip and guaranteed curvature radius 10nm or less. |
Copyright © 1998 - 2008, NT-MDT. All rights reserved.
|
|
|
|
